APPLE INC | 2013 | FY | 3


Note 10 – Commitments and Contingencies

Accrued Warranty and Indemnification

The Company offers a basic limited parts and labor warranty on its hardware products. The basic warranty period for hardware products is typically one year from the date of purchase by the end-user. The Company also offers a 90-day basic warranty for its service parts used to repair the Company’s hardware products. The Company provides currently for the estimated cost that may be incurred under its basic limited product warranties at the time related revenue is recognized. Factors considered in determining appropriate accruals for product warranty obligations include the size of the installed base of products subject to warranty protection, historical and projected warranty claim rates, historical and projected cost-per-claim, and knowledge of specific product failures that are outside of the Company’s typical experience. The Company assesses the adequacy of its pre-existing warranty liabilities and adjusts the amounts as necessary based on actual experience and changes in future estimates.

The following table shows changes in the Company’s accrued warranties and related costs for 2013, 2012 and 2011 (in millions):

 

     2013     2012     2011  

Beginning accrued warranty and related costs

   $ 1,638      $ 1,240      $ 761   

Cost of warranty claims

     (3,703     (1,786     (1,147

Accruals for product warranty

     5,032        2,184        1,626   
  

 

 

   

 

 

   

 

 

 

Ending accrued warranty and related costs

   $ 2,967      $ 1,638      $ 1,240   
  

 

 

   

 

 

   

 

 

 

The Company generally does not indemnify end-users of its operating system and application software against legal claims that the software infringes third-party intellectual property rights. Other agreements entered into by the Company sometimes include indemnification provisions under which the Company could be subject to costs and/or damages in the event of an infringement claim against the Company or an indemnified third-party. However, the Company has not been required to make any significant payments resulting from such an infringement claim asserted against it or an indemnified third-party and, in the opinion of management, does not have a potential liability related to unresolved infringement claims subject to indemnification that would materially adversely affect its financial condition or operating results. Therefore, the Company did not record a liability for infringement costs related to indemnification as of either September 28, 2013 or September 29, 2012.

The Company has entered into indemnification agreements with its directors and executive officers. Under these agreements, the Company has agreed to indemnify such individuals to the fullest extent permitted by law against liabilities that arise by reason of their status as directors or officers and to advance expenses incurred by such individuals in connection with related legal proceedings. It is not possible to determine the maximum potential amount of payments the Company could be required to make under these agreements due to the limited history of prior indemnification claims and the unique facts and circumstances involved in each claim. However, the Company maintains directors and officers liability insurance coverage to reduce its exposure to such obligations, and payments made under these agreements historically have not been material.

Concentrations in the Available Sources of Supply of Materials and Product

Although most components essential to the Company’s business are generally available from multiple sources, a number of components are currently obtained from single or limited sources. In addition, the Company competes for various components with other participants in the markets for mobile communication and media devices and personal computers. Therefore, many components used by the Company, including those that are available from multiple sources, are at times subject to industry-wide shortage and significant pricing fluctuations that can materially adversely affect the Company’s financial condition and operating results.

The Company uses some custom components that are not commonly used by its competitors, and new products introduced by the Company often utilize custom components available from only one source. When a component or product uses new technologies, initial capacity constraints may exist until the suppliers’ yields have matured or manufacturing capacity has increased. If the Company’s supply of components for a new or existing product were delayed or constrained, or if an outsourcing partner delayed shipments of completed products to the Company, the Company’s financial condition and operating results could be materially adversely affected. The Company’s business and financial performance could also be materially adversely affected depending on the time required to obtain sufficient quantities from the original source, or to identify and obtain sufficient quantities from an alternative source. Continued availability of these components at acceptable prices, or at all, may be affected if those suppliers concentrated on the production of common components instead of components customized to meet the Company’s requirements.

The Company has entered into various agreements for the supply of components; however, there can be no guarantee that the Company will be able to extend or renew these agreements on similar terms, or at all. Therefore, the Company remains subject to significant risks of supply shortages and price increases that can materially adversely affect its financial condition and operating results.

Substantially all of the Company’s hardware products are manufactured by outsourcing partners that are located primarily in Asia. A significant concentration of this manufacturing is currently performed by a small number of outsourcing partners, often in single locations. Certain of these outsourcing partners are the sole-sourced suppliers of components and manufacturers for many of the Company’s products. Although the Company works closely with its outsourcing partners on manufacturing schedules, the Company’s operating results could be adversely affected if its outsourcing partners were unable to meet their production commitments. The Company’s purchase commitments typically cover its requirements for periods up to 150 days.

Other Off-Balance Sheet Commitments

Lease Commitments

The Company leases various equipment and facilities, including retail space, under noncancelable operating lease arrangements. The Company does not currently utilize any other off-balance sheet financing arrangements. The major facility leases are typically for terms not exceeding 10 years and generally provide renewal options for terms not exceeding five additional years. Leases for retail space are for terms ranging from five to 20 years, the majority of which are for 10 years, and often contain multi-year renewal options. As of September 28, 2013, the Company’s total future minimum lease payments under noncancelable operating leases were $4.7 billion, of which $3.5 billion related to leases for retail space.

 

Rent expense under all operating leases, including both cancelable and noncancelable leases, was $645 million, $488 million and $338 million in 2013, 2012 and 2011, respectively. Future minimum lease payments under noncancelable operating leases having remaining terms in excess of one year as of September 28, 2013, are as follows (in millions):

 

2014

   $ 610   

2015

     613   

2016

     587   

2017

     551   

2018

     505   

Thereafter

     1,855   
  

 

 

 

Total minimum lease payments

   $ 4,721   
  

 

 

 

Other Commitments

As of September 28, 2013, the Company had outstanding off-balance sheet third-party manufacturing commitments and component purchase commitments of $18.6 billion.

In addition to the off-balance sheet commitments mentioned above, the Company had outstanding obligations of $1.3 billion as of September 28, 2013, which consisted mainly of commitments to acquire capital assets, including product tooling and manufacturing process equipment, and commitments related to advertising, research and development, Internet and telecommunications services and other obligations.

Contingencies

The Company is subject to various legal proceedings and claims that have arisen in the ordinary course of business and that have not been fully adjudicated. In the opinion of management, there was not at least a reasonable possibility the Company may have incurred a material loss, or a material loss in excess of a recorded accrual, with respect to loss contingencies. However, the outcome of litigation is inherently uncertain. Therefore, although management considers the likelihood of such an outcome to be remote, if one or more of these legal matters were resolved against the Company in a reporting period for amounts in excess of management’s expectations, the Company’s consolidated financial statements for that reporting period could be materially adversely affected.

Apple Inc. v. Samsung Electronics Co., Ltd, et al.

On August 24, 2012, a jury returned a verdict awarding the Company $1.05 billion in its lawsuit against Samsung Electronics Co., Ltd and affiliated parties in the United States District Court, Northern District of California, San Jose Division. On March 1, 2013, the District Court upheld $599 million of the jury’s award and ordered a new trial as to the remainder. Because the award is subject to entry of final judgment, partial re-trial and appeal, the Company has not recognized the award in its results of operations.

VirnetX, Inc. v. Apple Inc. et al.

On August 11, 2010, VirnetX, Inc. filed an action against the Company alleging that certain of its products infringed on four patents relating to network communications technology. On November 6, 2012, a jury returned a verdict against the Company, and awarded damages of $368 million. The Company is challenging the verdict, believes it has valid defenses and has not recorded a loss accrual at this time.


us-gaap:CommitmentsAndContingenciesDisclosureTextBlock